Note 1: |
ADI as ascorbyl palmitate, ascorbyl stearate, or both. Use
level reported as ascorbyl stearate. |
Note 2: |
Level in food as consumed. |
Note 3: |
Group ADI for benzoic acid and its calcium, potassium, and
sodium salts, and benzyl acetate, alcohol, and benzoate. Use level reported as
benzoic acid. |
Note 4: |
Used in concentrated form of food. |
Note 5: |
Fat or oil basis. |
Note 6: |
ADI note: conditional 0.05-0.25. |
Note7 |
ADI as calcium disodium EDTA; no excess of disodium EDTA
should remain in foods. |
Note 8: |
ADI note: provisional maximum tolerable daily intake (PMTDI)
for iron. |
Note 9: |
Group ADI for formic acid and ethyl formate. INS Nos. 237 and
238 = NE, but are included in the group because they are salt forms of a weak
acid (INS No. 236). Use |
|
level reported as formic acid. |
Note 10: |
ADI as sum of ethyl, methyl, and propyl compounds. INS Nos.
215, 217, & 219 = NE, but are included in the group because these compounds
are covered by the group |
|
ADI in the broadest sense. Use level reported as
p-hydroxybenzoic acid. |
Note 11: |
Surface treatment only. |
Note 12: |
ADI note: high viscosity (incl. P100(H) oil) = 20; medium and
low viscosity: Class I (incl. P70(H) oil) = 1 (temporary); Class II (include.
N70(H) & N70(A) oils) and Class |
|
III (incl. P15(H), N15(H), & N10(A) oils) = 0.01
(temporary group ADI). |
Note 13: |
Unconditional ADI in Units/kg bw. |
Note 14: |
ADI as nitrate ion. |
Note 15: |
As residual NaNO3. |
Note 16: |
Residual level. |
Note 17: |
Added level; 250 mg/kg residual level. |
Note 18: |
Added level: 70 mg/kg residual level. |
Note 19: |
As residual NO;. |
Note 20: |
Use level as mg/L raw mash. |
Note 21: |
ADI as nitrite ion. |
Note 22: |
Added level; 175 mg/kg residual level as
NaNO3. |
Note 23: |
Added level; 50 mg/kg residual level as
NaNO3. |
Note 24: |
Added level; 70 mg/kg residual level as
NaNO3. |
Note 25: |
Added level; 100 mg/kg residual level. |
Note 26: |
Maximum tolerable daily intake (MTDI) 70 mg/kg bw, as
phosphorus from all sources. |
Note 27: |
Group ADI for sorbic acid and its calcium, potassium, and
sodium salts. Use level reported as sorbic acid. |
Note 28: |
As tin. |
Note 29: |
ADI note: provisional maximum tolerable daily intake (PMTDI)
for inorganic tin, including stannous chloride. |
Note 30: |
Group ADI for sulphur dioxide and sulphites, as SO;. Use level
reported as residual SO2.. |
Note 31: |
ADI is temporary. |
Note 32: |
Use level reported as thiodipropionic acid. |